How we handle pallet racking and warehouse storage installation
We handle pallet racking and warehouse storage installation for businesses adding new storage capacity, relocating used equipment, extending an existing run or installing recovered racking purchased from us. We start with the real warehouse, the equipment and the result you need. We do not force every job into the same package. A few clear facts at the start normally tell us whether we need photos, a stock check, more measurements or a site visit.
The aim is a planned installation that turns the supplied components into a usable warehouse storage system with the correct layout, levels and accessories. Once we understand the job, we can plan the next step without making it harder than it needs to be. Used equipment varies by make, size, condition and layout, so getting the basics right early saves time later.
What we can cover
We can cover pallet racking frames and beams, shelving, guards, barriers, mesh, selected mezzanine components and related warehouse storage equipment where We have agreed an installation scope. Warehouse jobs often cross more than one area. A racking strip out may include shelving, mesh, plant or mezzanine steel. A supply job may need guards, delivery and fitting as well as the main frames and beams.
Keeping the work with one team makes the job easier to follow. We handle anything from single bays and spare parts through to large distribution centre clearances. Size matters, but the right equipment, access and timing matter more.
What to send us first
A useful first brief normally includes layout information, floor plan, clear height, racking specification, pallet and load data, site access, installation programme, delivery sequence and any operational restrictions within the building. You do not need to know every technical term. If you are not sure what system you have, send a clear photo of a beam connector, upright and any label you can see from ground level.
For larger sites, a short walk through video can show height, aisles, doors, columns and the general scale of the work. For stock matching, close photos and measurements are usually more useful. Send what you know and we will tell you what else we need.
How we check the equipment and the job
We look at correct component identification, layout, line and level, floor fixing, beam locking, frame condition, protection, clearances and confirmation that the installed arrangement matches the agreed specification. Used storage equipment has to be treated as a system. Parts that look similar may not match, and a simple bay count does not always show how hard a removal will be.
A good check at the start helps us avoid wrong stock, poor fits and weak plans. It also helps us work out labour, plant, transport and timing before the job starts.
Site safety and planning
Installation work needs suitable competence, access equipment, controlled work areas and a clear understanding of the storage system. The finished installation should be used within its specified loading and kept under an appropriate inspection regime.
The plan must suit the building. A live warehouse may need clear separation from people and trucks. A high rack strip out may need specialist access equipment. A small unit can still be difficult if access is tight. We plan around the real site rather than a standard template.
Value in used warehouse equipment
Coordinating supply, delivery and installation through one conversation can reduce avoidable handovers. It is particularly useful when used stock needs sorting, transporting and installing within a defined programme.
Used racking and shelving are not all worth the same. Make, quantity, condition, size and current demand all matter. We look at the useful value of the equipment alongside the labour, handling and transport needed to move it.
Reuse where it makes sense
Used racking can be successfully relocated when components are identified, handled and installed correctly. Our Erith project is one example where recovered AR racking went on to another customer installation.
Good used equipment can have a long working life when it is sound, compatible and right for the next job. We do not reuse damaged or unsuitable parts just because they are available. The right stock still needs the right check and the right setup.
Local numbers across the UK
You can speak to us through Reigate, Swadlincote, Milton Keynes, Bournemouth, Cornwall, Devon or Brighton and Hove. These are direct local contact points backed by our UK wide work. Choose the office that suits you and we will take it from there.
Send the proposed layout and racking specification, or ask us what measurements are needed if you are still at an early stage. You can also use our enquiry form or WhatsApp. Send the site postcode with your message so we can get the job to the right person quickly.
A clear job from first call to finish
Good warehouse work is easier when everyone knows what is happening next. We keep the main points clear from the start: what equipment is involved, who is doing what, what access is available, what date matters and where the material is going. That helps reduce last minute changes and makes it easier for your site team to plan around us.
If the job changes, tell us early. A different handover date, extra equipment, blocked access or a change to the new rack layout can affect labour, transport and stock. We would rather adjust the plan while there is time than discover a problem on the day.
Photos and measurements that really help
For racking, a wide photo shows the run and height, while a close photo shows the connector and upright. For mezzanine work, show the main columns, stairs, deck and underside. For a clearance, add a walk through video if you can do it safely. These simple details help us see the job before anyone travels to site.
Measurements do not need to be perfect for the first call. Rough height, depth, beam length, bay count and floor area are enough to start. If a size needs to be exact before supply or fitting, we will make sure it is checked at the right stage.
What needs checking before installation
Before suitable racking is installed, the warehouse dimensions, pallet loads, forklift, aisle widths, floor, rack configuration and required protection all need to be understood. If the rack is used equipment, compatibility and condition need to be checked as well.
The Rackway planner is useful for building the first brief because it keeps the warehouse, pallets, forklift and beam heights in one place. We can then review the plan and identify what still needs to be confirmed before supply or installation.
Timing the work properly
Timing matters on pallet racking and warehouse storage installation. Tell us the date that matters, whether the warehouse is still working and when access is available. A simple collection can be planned very differently from a full strip out that has to finish before a lease handover. The earlier we know the real deadline, the easier it is to plan labour, plant and transport around it.
We also need to know what can happen at the same time. Some sites can keep picking from one area while another area is cleared. Other sites need a clean break between normal warehouse work and removal work. We set the plan around the building and the people using it rather than assuming every site can be treated the same way.
Access, loading and lorry movements
Good access can make a large job straightforward. Poor access can make a small job take longer. Tell us about loading doors, yards, dock levellers, narrow turns, shared roads, height limits and any times when lorries cannot enter the site. Photos of the loading area are useful because they show more than a postcode ever can.
For removal work, dismantled steel has to move from the rack to a safe holding point and then onto transport. For supply work, the flow is reversed. Planning those movements early helps keep doors open, keeps the floor clearer and reduces the chance of material building up in the wrong place.
What changes the price or value
The price of pallet racking and warehouse storage installation is never based on one number alone. Quantity, make, condition, dimensions, access, height, labour, transport and current demand can all change the result. A large amount of common racking in good condition may have a clear reuse route. A smaller mixed system with difficult access may need a different approach.
That is why we ask for enough information before giving a firm answer. We would rather explain what is affecting the job than give a quick number that changes later. Clear photos, a postcode, rough quantities and the date you are working to are often enough for us to decide what should happen next.
Working around a live warehouse
If your warehouse is still operating, tell us what must stay live. That may include picking aisles, fire routes, loading doors, charging areas or space used by another contractor. We can then plan the order of work so the project does not block the areas your team still needs.
A live site also needs clear communication. We need to know who controls access, what induction is required and when plant or vehicles can move. These points are simple, but they have a big effect on how smoothly the job runs. Good planning before the first day is usually faster than solving access problems after the team arrives.
Transport, collection and delivery
Warehouse steel is bulky even when it is dismantled. Frames, beams, bracing, deck, guards and mezzanine parts all need to be grouped and loaded in a sensible order. We plan transport around the quantity, component sizes and site access so the material can leave or arrive without blocking the warehouse.
If equipment is being reused on another site, tell us the receiving postcode and timing as early as possible. That can affect how material is sorted and loaded. If stock is coming into our own flow instead, we still separate useful components carefully so they can be checked, stored and matched to future requirements.
What happens after you contact us
First, we check the information you send. If the job is clear, we can move straight to stock checks, a valuation, a quote or a proposed next step. If something important is missing, we will ask for the exact detail we need rather than sending you a long technical list.
For larger or more unusual work, a site visit may be the right next step. For smaller stock enquiries, photographs and measurements can be enough. Either way, the aim is the same: make the route from first message to a clear decision as short as possible without guessing about the equipment or the site.
Frequently asked questions
Can you install used pallet racking?
Yes. Installation can be arranged for suitable equipment as part of an agreed project.
Do you need a layout first?
A layout or clear dimensions help confirm the required bays, aisles and levels.
Can recovered racking be installed at another site?
Yes, if the components remain suitable and the new configuration is correctly specified.
Do you install safety barriers too?
Guards, barriers and related accessories can be included where agreed and available.
Can installation happen outside normal operations?
Programme restrictions can be discussed during planning. Feasibility depends on the site and project.
What should I send for a quote?
Send the site postcode, layout, racking specification, bay count, heights and any access restrictions.